The motor is a 12 VDC, ¼ hp continuous speed electric motor. The maximum amp draw at full load, 175 psi (12 b), will be 21 amps. The pump is a continuous duty, piston type, positive displacement pump. The pump is rated at ½ gpm. The pump shall be supplied with a 175 psi (12 b) safety relief valve for protection against over pressurization. The Venturi will flow up to 135 gpm (511 L/min).
64 lbs. (29 kg)
19"L x 10"W x 14"H
.5 gpm/130 gpm, 1/4 hp 12vdc motor, pilot operated relief valve
Low concentrate float switch
Venturi 1½” NPT
Master check valve, 1½” NPT stainless steel
Includes installation kit
Control panel placard with on/off switch and low concentrate light, adjustable foam percentage valve
Wildland/Quick Attack Fire Vehicle
This simple non-electronic device is the key to reliable repeatable and safe operation. The PORV controls the foam concentrate flow path by diverting the excess foam concentrate, not utilized in the injection process, back to the foam concentrate tank. The PORV takes a water pressure signal from the main waterway and shifts the valve mechanically to control the system.