Fire Pumps, Fire Apparatus, Fire and Defense Equipment

  • Steve Chamberlin
  • Engineer, Odin Foam Division
  • Direct: 319.987.2121

Odin® 150-200 CFM PTO Compressor Kit

Pump Image

SKU:

  • Pump Info

    The air compressor must be designed to be installed on the apparatus chassis and have 100% duty cycle. The air compressor shall be an American manufactured, continuous duty, oil-injected type, rotary screw rated up to 150 cfm @ 150 psi. Parts shall be readily available, and stocked in USA with certified service centers in all 50 states. It shall have an additional speed up gearbox designed and integrally built by the compressor manufacturer. Compressor to have side-by-side gear set to provide for maximum ground clearance. A copy of the certification record shall be included.

    The air receiver/separator (vessel) must act as an air/oil separator. The vessel shall be powder coated carbon steel material and contain an integrated coalescing oil separator element. The vessel must have a lubricant sight glass no smaller than 2” in diameter. The pressure vessel must have a 200 psi (13.8 b) high-pressure relief valve. The vessel must have a replaceable spin on 25-micron oil filter with safety bypass feature. It must contain an integral, pneumatically piloted, blow down valve. The vessel shall be a horizontal mount design. (A vertical mount air/oil receiver is available as an option.) The vessel shall meet all vessel ASME requirements. Oil carryover is rated 10 ppm or under at full flow.

  • Engine

    The air receiver/separator (vessel) must act as an air/oil separator. The vessel shall be powder coated carbon steel material and contain an integrated coalescing oil separator element. The vessel must have a lubricant sight glass no smaller than 2” in diameter. The pressure vessel must have a 200 psi (13.8 b) high-pressure relief valve. The vessel must have a replaceable spin on 25-micron oil filter with safety bypass feature. It must contain an integral, pneumatically piloted, blow down valve. The vessel shall be a horizontal mount design. (A vertical mount air/oil receiver is available as an option.) The vessel shall meet all vessel ASME requirements. Oil carryover is rated 10 ppm or under at full flow.

  • Performance

    Air Compressor
    200 cfm (5663 L/M) @ 125 psi (8.6 bar)
    150 cfm (4247 L/M) @ 125 psi (8.6 bar)

  • Features

    PTO driven compressor
    Available in 150 and 200 cfm with inlet valve and mounting bracket
    Horizontal mount air/oil receiver
    Control panel with high temperature shut down
    Odin AutoBalance™ valve system
    Stainless steel, plate type heat exchange with thermo valve
    American made
    Master air check valve
    Remote air intake filter kit

  • Applications

    Mini Pumper
    Rescue pumper
    Tactical Tender
    Wildland/Interface
    Retrofit

  • Dimensions

    Contact Odin for schematic and CAD drawings of components.
    150 cfm shipping weight: 535 lbs. (242.6 kg)
    200 cfm shipping weight: 585 lbs. (265.3 kg)

  • Technology

    The compressor control panel shall include the following controls and instruments. The compressor controls and instruments shall be mounted on a custom designed embossed placard. The standard panel will require the transmission to operate the PTO and be switched from the cab. The optional overspeed panel will have aftermarket controller and switch the PTO from the compressor control panel.

  • Spec Sheets