PuriFire™ 3S10P

3S10P

The PuriFire™ 3S10P is a three-stage portable water purification unit, it can purify freshwater up to 10 gallons per minute and effectively kill bacteria, cysts, and virus when operated properly. Key components of this unit are NSF certified, which guarantee the best purification ability and safety to human health.

SPECS

Water production rate: 0~10 gpm

Maximum TDS level: 500 ppm

Feed water pressure limits: 20~90 psi

Feed water pH limits: 6~9

Feed water turbidity limits: 1~40 NTU

Feed water temperature limits: 35~100°F (2~38°C)

Power source: 12 VDC

Weight: 200 lbs

Ultraviolet light: 16 mJ/cm2 (16,000 microwatt-sec/cm2)

LAKOS cyclone separator: Carbon steel, 4-10 gpm, Pressure loss 5-12 psi

Dual TDS meter: Battery powered, 0~999 ppm

Spin down strainers: 60/20 micron

Filter housing: 20" PP blue standard, Pressure relief

Sediment depth filter: 5 micron, Polypropylene (PP)

UV system carbon block: 0.5 micron

UV system: 120 VAC

Davey portable pump: 20 gpm, 90 psi

Emergency generator: 2.9 HP, 120 V, 60 Hz, 1200 W

DOWNLOADS

PuriFire 3S10P Specs