Eliptical Tanker
Eliptical Tanker
Chassis Specifications
Chassis
- 2006 KENWORTH T300 TANDEM CHASSIS
- CAT C7 Acert, 330 hp, 860 lb/ft torque @ 1440 RPM - Pre Emmission Engine
- Allison 3500EVS, 5-spd transmission with pushbutton controls
- Exhaust retarder - Jake Extarder exhaust brake
- Dana Spicer DSP41P 40,000 lbs. dual rear axles
- Chalmers 854-40-XL-HS Heavy-Duty tandem rear suspension
- 5:29 rear axle ratio
- Rear wheel, cross locking differential
- Dana Spicer E-1462I, 14,600 lb front axle
- 12R22.5 radial Bridgestone R250F, 16 ply front tires
- 11R22.5 radial Bridgestone M711, 14 ply rear tires
- Aluminum 22.5 wheels with outboard wheels polished - includes bright hub and nut covers
- 270 amp Leese-Neville alternator with cab cut-off switch & warning light
- Fan hub manual override switch
- 3 - Paccar GP31 700 amp batteries (2100 CCA)
- Battery disconnect switch in cab - NFPA compliant
- Polished 56 gal fuel tank - right side
Chassis (Continued)
- Muffler, vertical with SS muffler shield, chrome lower elbow and chrome curved tailpipe
- Two removable front tow hooks
- Ember separator - NFPA compliant
- Air filter restriction gauge - NFPA compliant
- Air system-rapid pressure buildup - NFPA compliant
- Keyless 4-position ignition switch - NFPA compliant
- Air conditioning
- Electric-powered RH door window
- Tilt steering column
- AM/FM radio with clock
- Sunvisor, exterior with integral marker lights
- Bumper, stainless steel clad aluminum channel
- 911, NON-SCBA air suspension driver's seat - NFPA compliant
- 911, NON-SCBA air suspension officer's seat - NFPA compliant
- Seat belts, red - NFPA compliant
- Dual Kenworth aerodynamic powered and heated mirrors with integral convex mirrors
- Daytime running lights
- Optional Hannay Electric Return Reel w/ 50' Booster Hose & Nozzle
Tanker Body - UPF - 3000 GALLON ELLIPTICAL POLY-TANK
Standard Equipment
- (2) Poly-low-side front compartments, one each side
- Steel painted subframe mounted to UPF body w/mounting assembly
- Bright stainless steel tank wrap
- Baffled to meet NFPA requirements
- (1) 24" x 24" fill tower with anti-surge dome
- (1) 10" x 10" sump with 3" FNPT suction
- (1) Rear dump provision
- (1) 6" overflow vent
- (1) 2.5" FNPT rear fast fill with diffuser
- (1) Tank level gauge fitting
- UPF LIMITED LIFETIME TANK WARRANTY
- Class 1 multiplex body wiring
- (2) ROM roll-up satin finish aluminum doors with integral LED track lighting for each side compartment
- Federal Signal LED emergency lighting package
- (6) Federal Signal 20W halogen scene lights - auto activated by compartment doors and reverse gear
- Carson model SC-1002, "Volunteer" mechanical tone siren
- (1) Safety Vision rear color camera with in-cab 7" LCD color monitor
- (1) Fol-Da-Tank 3000 gal, 22 oz. vinyl portable tank with 7/8" round steel frame
- (1) Rear tank level gauge
- (2) Spanner wrenches and (1) hydrant wrench mounted in bracket mounted to rear of body
- NFPA reflective graphics
Optional Equipment
- Premium E.J. Metals dump package
- (3) E.J. Metals 10" diameter SS power retractable dumps on streetside, curbside and rear
- (3) Timer kits (5 second valve opening delay)
- (2) UPF, E.J. Metals side dump adapters
- (2) UPF tank to body dump housings
- (1) Safety Vision curbside color camera
- Class 1 "Command Master" in-cab control center
- Federal Signal LED rear directional arrow
- (1) Rear fast fill with 4" TFT slow close valve with 4" storz connection
- Zico, power portable tank rack
- Premium "Liberty" reflective flag graphics on sides of body
- (2) SCBA tubes integrated into body, (1) each side with Cast Products aluminum access doors
- HALE AP50, 500 GPM MIDSHIP SIDE MOUNT PUMP MODULE
Standard Pump Equipment
- Welded tubular aluminum module frame construction, featuring brushed stainless steel control
- panels. The standard AP module is side panel controlled with a left side operator's panel in
- brushed stainless steel.
- (2) 5" steamer inlets (1 per side) - manually controlled
- (2) 2.5" discharges (1 per side) - manually controlled
- (2) 2.5" suction pony's (1 per side) - manually controlled
- 3" tank to pump with inline check valve - manual push/pull control
- (2) 1.5" crosslays plumbed using (2) 2" valves
- 2.5" liquid filled pressure gauges used on all discharges
- 1/4 turn 3/4" drains/bleeders are included on all discharges
- 3-YEAR LIMITED PARTS AND LABOR PUMP WARRANTY
Additional Info
AVAILABLE FOR IMMEDIATE DELIVERY!
APPARATUS DOES NOT INCLUDE LOOSE EQUIPMENT AS LISTED IN NFPA 1901, 2003 EDITION!
|
